How To Make Your Own Wood Charcuterie Board. Working quickly, one board at a time, assemble the boards into the design you settled on in the last step. So the downloadable pattern is a half pattern.
I want to break down exactly what you’ll need to be on your way to create your own impressive cheese. Draw the charcuterie board shape on your piece of wood. How do you make a charcuterie board.
Table of Contents
For A Project Like This One, Any Type Of Hardwood Will Do Just Fine.
I cleaned the live edges up with a chisel and cut the board to about 34 inches. Charcuterie board on steel counter By now, you’ve seen charcuterie boards all over instagram, they’re amazing, but can also be a little daunting.
Now, Pull The Pencil So That The Rope Is.
All there is to making a rustic looking charcuterie board is cutting a piece of wood into a shape you like with a jigsaw (or a band saw) and then finishing it. How to build a classic charcuterie board arrange the board about 30 minutes prior to serving in order to give the cheese time to soften and come to room temperature. That’s how i felt for a long time.
Since This Is An End Grain, Be Sure Not To Skimp On The Amount Of Glue Since A Lot Will Be Absorbed.
The downside of making your own charcuterie boards is that in most cases you will need to either love sanding, or have a planer to smooth and level the wood out. Working quickly, one board at a time, assemble the boards into the design you settled on in the last step. Handle, though this board can be made in various sizes.
Decide How Long You Want Your Board To Be, Ours Are 24″ And 23″ Long, But You Can Make Yours As Long Or Short As You Want.
Then, tie a piece of string around the nail and around your pencil that’s as long as the radius of your round serving board. To draw a large circle, measure to find the centre of the board and lightly hammer a nail into it. The size of your charcuterie board is completely up to you and can be customized to fit anyones needs.
So The Downloadable Pattern Is A Half Pattern.
Walnut, maple and cherry are good choices and cost roughly $20 to $30 per board. Run a bead of waterproof wood glue along the long edges of the board and smooth with your fingers to cover the surface. Using an electric sander, start first with a coarse sandpaper like 80 grit to clean up the excess resin and to ensure the resin and wood are perfectly level.